Are There Any Maintenance Issues With Pavers?


Pavers that you have installed as a patio or walkway can run into small maintenance issues. These issues are related to the stones themselves, the landscaping at your house and how you use the pavers. You must be sure to understand these maintenance issues before you install the pavers. These maintenance issues cannot become surprises when you are trying to keep your home looking beautiful.

Shifting Pavers

Your pavers will shift over time if the land they were installed on is not that firm. Soft dirt and clay will allow your pavers to move, and you may notice that your entire patio or walkway is shifting one way or another. You must make sure that your pavers are installed on firm ground.

If they are not installed on firm ground, you need to be prepared to shore up the edges of the space to keep them from moving. Running water and silt can cause the pavers to shift, but a border area that is solid will help prevent further movement.

Broken Pavers

There are times when your pavers will break or crack due to weather conditions or overuse. You can pull up each paver and replace it if you want to, but you must make sure that you have access to a paver that matches your space. It is best for you to take a picture of the paver to make sure the color is the same, and you need to measure the paver to make sure you get on that is the same size. You may also use glue or other adhesives to glue a cracked brick back together.


When your pavers get dirty, they are going to discolor. You need to make sure you are sweeping off your pavers as much as you can. You also need to make sure that you are doing everything in your power to clean the pavers when the weather is good. A pressure washing service can quickly clean your pavers, and you will be able to see the original color arise from underneath all the dirt and debris.

When you are working hard to maintain your home, you must make sure that you have invested time and energy in looking after your pavers. When the pavers shift, break and get dirty, they must be dealt with quickly. Major problems can arise if you allow your pavers to go untouched for too long.

When Is It Time To Reseal a Concrete Surface?


Concrete sealers provide a barrier between your concrete and the elements. A properly sealed surface can resist stains and moisture damage, although few sealers are truly waterproof. Don’t wait until the old sealer is peeling up, or until visible staining and weather damage occurs. Plan to seal your concrete regularly as part of the normal maintenance of the surface.

When to Seal

How often you seal your concrete depends on the age of the concrete, your climate, and when it was last sealed.

Newly laid concrete takes approximately four weeks to full cure, so hold off on sealing it for at least one month after installation.

In hot or moist climates, concrete sealer requires replacement every two years. In dry climates, you sealer may last up to three years.

heavy traffic can necessitate more frequent sealer applications. Driveways and heavily used walkways may require sealing every two years, even in a dry climate.

The Best Time to Seal 

Early summer or early fall is the best time to seal your concrete. The weather is warm but not too hot, and frost isn’t a concern. Late fall isn’t ideal because falling leaves can damage the sealer as it cures. In mild climates where temperatures don’t rise much above 80 degrees Fahrenheit in summer, you can seal during the long, dry days of midsummer, but in hot climates midsummer sealing may take longer to cure.

Types of Sealer

Several types of sealer are available, and the one you choose depends on the type of concrete work and the sealing history of your concrete. Generally, it’s best to use the same type of sealer each time to avoid discoloration from sealer buildup. The basic choices for sealer include:

Penetrating sealers. These sealers contain silicates that protect exterior concrete. They also penetrate into the surface of the concrete, which provides increased stain and moisture resistance. These sealers are well-suited to driveways or in areas where ice melting chemicals are often used.

Acrylic sealers. Acrylic gives concrete a high sheen, so it’s especially well-suited to decorative or stained concrete work where the luster complements the details. It’s well-suited to both interior and exterior work. Acrylic also dries quickly.

Polyurethanes and epoxies. These high-sheen sealers are best suited to interior concrete floors and countertops. Although exceptionally water repellent, they can trap moisture in wet areas.

The Basic Process

Your contractor will follow a similar process when sealing your concrete. First, he must clean the surface, filling and repairing any cracks or damage. If the old sealer is begin to peel, he may need to remove it. Removal methods depend on the type of sealer. Surface sealers can sometimes be removed chemically, but penetrating sealers usually require grinding to fully remove them from the surface.

Once cleaned and repaired, the sealer is applied in an even coat. It can either be sprayed on or rolled on. After application, it’s left to cure. Curing time depends on weather and sealer type – your concrete contractor will let you know how long to stay of the concrete. Generally, it takes 12 to 24 hours for most sealers to dry.


What Is The Process Of Installing Paver In A Home?


Paving stones are long-lasting and versatile, and they can be customized to be dramatic or low-key. However, the process of installing pavers requires planning, elbow grease, and patience.

Step One – The Plan

An efficient plan is very important, so we use graph paper to design a scaled drawing of the project area. We recommend that you choose an area that has adequate drainage for durable and safety reasons. The ground should slope away from your home or any other structures.

You should contact your local utilities company to obtain information about your property so that we won’t accidentally strike any pipes or cables.

Next, you should select a material; concrete and brick pavers are very popular. However, you should select a style that suits your liking and your budget.

To calculate the amount of pavers that you will need, measure the square footage and add five percent. If your property has many curves, you should add an additional 10 percent to the square footage estimate.

Buying extra is recommended because we may have to cut some of the pavers so that they will fit properly. Fancy outlines usually require the most cuts.

Our technicians install pavers above the surface to prevent water pooling on the pavers. This is why we always begin at the highest point when we plan a slope.

Step Two – Excavation

All spaces that will be exposed to foot traffic will have 4-6 inches of base material. 12 inches of material will be used for driveways. The base material is commonly a crushed stone that has irregular edges. Base material is important because it stays strong after it is compacted. If a base has poor structural integrity, drainage problems will ruin the paving.

The final steps involve installing the edge restraints and laying a layer of sand. The restraints hold the shape of the pavers. If your property is irregularly shaped, we will have to cut them so that they will follow the edges of the design. The sand is a key component because it holds the pavers in place. We use a coarse sand, and we smooth it to a depth of about one inch.

Step Three – Installation

When the pavers are installed, there will be gaps, but this is not a huge concern because there must be a 1/16 to 1/8 inch gap between the pavers. We commonly seal pavers to increase durability and lower maintenance.

Why Are Pavers Gaining in Popularity Around the United States?


In today’s world, homeowners are increasingly choosing to utilize paving stones over traditional solutions. These can be far more cost-effective and withstand the high pressure exerted on them by today’s machines. This makes them popular for driveways, porches, and sidewalks. Pavers look elegant and come in many different shapes and sizes. Many paving stones that are sold today also come with a lifetime warranty to ensure a longer useful life. Below is a full explanation of why pavers are growing in popularity in the United States and around the world.

1. Most Cost-Effective

Pavers are manufactured either domestically or from anywhere around the world. This means they do not have to be expensively imported from exotic locations. Pavers also do not have to be mined out of the ground. This means that they can be manufactured much more cost-effectively than their natural counterparts. Modern pavers also use efficient materials that are optimized to be as cost-effective as possible. This means that homeowners can expect to save a great amount of money by using pavers. With modern manufacturing techniques, these pavers also look almost identical to the real thing.

2. Increased Pressure Tolerance

Unlike ordinary bricks, pavers have an exceptional pressure tolerance that makes them appropriate for specialized applications. Most pavers are rated to withstand pressures as high as 8000 psi. This means that heavy machinery, cars, and ordinary use will not cause pavers to crack or settle over time. Most pavers are also interlocking, which enables them have an even higher pressure tolerance. This makes pavers one of the strongest materials available for use around a home. When homeowners use pavers, they can therefore rest assured that their patios and driveways will not require expensive routine maintenance to keep them looking good.

3. Variety of Options

When homeowners choose to use pavers, they have a wide selection of options to choose from. Some are designed to look like ordinary red brick, while others resemble tile or even granite. Some pavers are designed to be placed over concrete, while others can be put on top of gravel. In fact, pavers can generally simulate just about any stone that homeowners intend use. Since these stones look almost exactly like their natural counterparts, they can be a great option for many of today’s homeowners. This flexibility is one of the primary reasons why pavers are increasingly being used by homeowners in the United States.

4. Uniform Manufacturing

Since pavers are mass-produced, replacements components are easier to find when they are needed. While many homeowners ignore this, the reality is that a single stone could chip or break at some point. If a replacement cannot be found, the homeowner could be left with an unsightly stone that ruins the look of a beautiful patio. Due to the fact that pavers are uniformly manufactured, replacements are widely available. Manufacturers also keep an inventory of replacement pavers in case the customers need them in the future. This helps to ensure that homeowners can replace broken pavers when this is necessary.

5. Better Drainage

Most pavers are manufactured in a way that enables them to facilitate more effective drainage. Pavers often have specialized joints that are designed to help water to flow in the right direction. While water can build up on ordinary materials, this is not the case with pavers. These features can also help to increase skid resistance during both rain and snow. This can help cars to get a better grip on the on the driveway. At the same time, these features will also help to soften up icy patches. These functional features can offer substantial advantages over traditional stone materials.

What Are Five Ways Pavers Can Be Maintained Easily?


Paver patios are gorgeous, adding a bit of class to any backyard. However, they do require care and maintenance to maintain their look. Luckily, maintaining a paver patio is easy to do and requires minimal time and effort each month. Here’s how you do it.

1. Be proactive and take preventative measures.

When the pavers are first installed, pour polymeric sand into the cracks. This sand hardens when moistened, which helps to hold the pavers in position and prevents weeds from growing through the cracks. Ensure that all cracks are thoroughly filled, as even a small hole can open up potential damage from water later down the line.

2. Sweep the pavers regularly.

Once or twice per month, take a yard broom to your patio and sweep it clean. Wet leaves can stain the brick and leave unsightly spots on them, while rocks and other debris can chip your pavers and post other risks. There is also the risk of falling on wet or scattered debris on your patio, so it pays to keep it clean. This should take no more than a few minutes of your time, although you may need to sweep more frequently in the winter and fall when leaves fall more often.

3. Blast away grime.

Sometimes the bricks may become coated in grime, either from algae growing on a moist area or because of a build up of dirt. Remove this grime by spraying the bricks with a water hose. Be careful not to hit the cracks between the bricks directly, as this can loosen the sand and cause instability in your patio. Instead, use a sweeping motion over the surface and don’t aim too much force in any one section of the patio. Don’t be afraid to scrub away at the grime if necessary.

4. Remove stains once per year with a wire brush.

Stain removal is easy, especially on bricks. Mix a bit of detergent with water and apply it to the brick, allowing it to soak for a few moments. Then take a wire brush and scrub away at any stain you see; however, make sure to test the brush on a brick out of sight in case it damages them. If the brush is too rough, switch to a softer bristle. Make sure to completely wash away the detergent after you’ve finished scrubbing, as it can cause damage or bleach the bricks and lead to unappealing spots.

5. Make sure to seal the layers every few years.

Special sealants are produced that do a fantastic job at sealing the bricks and protecting them from harm. It’s a good idea to apply this sealant once every two or three years – it blocks many environmental factors from hitting the bricks and greatly increases their longevity. It also helps to prevent stains from actually settling into the bricks, allowing you to clean them more easily.

Pavers may require a bit of maintenance on your part, but they’re well worth any effort. A well maintained patio will be the talk of the neighborhood and the site of many backyard barbecues. If your patio will provide you with that much fun and entertainment, why not take a few minutes to make sure it’s clean?